RJ11/RJ12/RJ45 BNC/UTP/FTP/STP cable tester
103-02
5908268772064
Netrack
Network tester for basic testing of network connections. Designed for testing connections based on twisted-pair LAN cables, telephone cables and coaxial cables. Especially recommended for computer networks. The set includes a main unit and a terminator to put on at the end of the tested connection.
Description
The tester is designed to quickly and efficiently check the correctness of the connection. With this device, faulty connections, short circuits or interruptions can be detected.
Cable tester - the most important features
- detection of incorrect connections,
- short-circuit detection,
- gap detection
- connection map - by observing the signaling of the connection sequence, you can read the connection map,
- two modes of full test run: fast - 3s, slow - 10s
- tests cables: UTP, STP, BNC, coaxial, telephone,
Technical parameters of the tester
Principal Tester
- height [mm] 112
- width [mm] 65
- depth [mm] 28
- weight [kg] 0.081
terminator
- height [mm] 105
- width [mm] 36
- depth [mm] 28
- weight [kg] 0.04
The whole set
- height [mm] 145
- width [mm] 100
- depth [mm] 32
- weight [kg] 0.152
Packaging
- packaging dimensions: 154/110/35mm
- weight in the package: 0.184 kg
Contents of the package
- master tester
- terminator
- case
ATTENTION!! a 9V battery is required to operate the device. The set does not contain batteries
Network cable tester application
Network cable tester necessary for installers. It allows you to quickly check the connection made and diagnose the error. It speeds up work and minimizes errors.
see also
Comparision table RJ45 cable testers
| Image |
|
|
|
|
|
| Product name | cable tester with LCD display RJ45/RJ11/BNC/USB, map test | RJ11/RJ12/RJ45 BNC/UTP/FTP/STP cable tester | RJ45/RJ11/BNC/USB cable tester | RJ45/RJ11/BNC/USB/map test cable tester, LCD display, 8 controllers | tester and cable finder RJ45/RJ11 |
| Indeks | 103-07 | 103-02 | 103-12 | 103-15 | 103-09 |
| Price (PLN) | 529.99 | 34.99 | 99.99 | 599.99 | 139.99 |
| Detection of incorrect connection | Yes | Yes | Yes | Yes | Yes |
| Short circuit detection | Yes | Yes | Yes | Yes | Yes |
| Break detection | Yes | Yes | Yes | ||
| Measure distance to gap | Yes | Not | Not | Yes | Not |
| Locating a Gap with the Probe | Yes | Not | Not | Yes | Yes |
| Display of the link map | Yes | Yes | Not | Yes | Yes |
| Cable length measurement | Yes | Not | Not | Yes | Not |
| Maximum length to be measured | 2000 | Not applicable | --- | 2000 | --- |
| Tested cables | UTP, STP, USB, BNC, telephone, electric | UTP, STP, BNC, telephone | UTP, STP, USB, BNC, telephone, 1394, electrical | UTP, STP, USB, BNC, telephone, electric | UTP, STP, telephone, electric |
| Storing measurements in memory | Yes | Not | Not | Yes | Not |
| Probe - cable finder | Yes | ||||
| Terminators | 8 pcs | 1 piece. | 1 piece. | 8 pcs | 1 piece. |
| Basic Test Speed | 3s | 3s / 10s | 5 sec | ||
| Wiremap test speed | 3s | 3s / 10s | 5 sec | ||
| Length / Distance Test Speed | 3s | --- | --- | ||
| Crosstalk test between pairs - crosstalk | Not | Not | Not |
Download PDF
Network tester for basic testing of network connections. Designed for testing connections based on twisted-pair LAN cables, telephone cables and coaxial cables. Especially recommended for computer networks. The set includes a main unit and a terminator to put on at the end of the tested connection.