4F ventilation panel for standing RACK cabinets, 1200mm with digital thermostat
100-005-001-304
5908268779230
Netrack
Ventilation panels, fans, thermostats - proper ventilation of a 19" Rack cabinet protects devices from damage by overheating. Ventilation is necessary to ensure stable operation of devices. Fans, ventilation panels, thermostats allow you to configure the right solution for each RACK cabinet. We recommend Netrack ventilation devices.
Description
RACK cabinet ventilation
Each 19" cabinet can be fitted with 19" standard fans Netrack or other manufacturer.
Ventilation panel with two fans and built-in thermostat
Ventilation panel with four fans and built-in thermostat
Ventilation panels placed inside the cabinet, above or below devices that emit a large amount of heat. They force the desired air circulation. Most often, the natural, gravitational movement of heated air from bottom to top is supported in this way. Built-in thermostats they turn on ventilation only when the temperature rises. It is possible to use 2 or more fans and program them to turn on at successive temperature thresholds. This solution reduces energy consumption, noise and additionally protects the devices in the event of failure of one of the fan sets.
Both in hanging and standing cabinets, in addition to the use of universal 19" fans, it is possible to install ventilation sets in specially designed holes. In this case, the fans are usually mounted in the roofs of RACK cabinets. The use of this type of ventilation ensures a very quick exchange of air inside the RACK cabinet.
A single fan has a capacity of over 100m3 per hour. It should be remembered to ensure low temperature outside the cabinet so that it can be inside so that the exchange of air causes cooling of the devices.
120x120mm fans can be used with most wall cabinets. Depending on the model, 1 or 2 fans can be installed. Some cabinets have the option of installing fans both in the roof and in the floor. The recommended solution is:
fan:
1F 120x120mm fan with power cord
thermostat:
Standing server cabinets use roof fans adjusted to the depth of the cabinet.
For cabinet 600mm
For 800mm cabinet
For 1000mm cabinet
For 1200mm cabinet
Fans and thermostats - execution
- bent steel plate
- sheet thickness: 1.5 [mm]
- thermally cured powder coating
Fans and thermostats - technical parameters
- capacity 460 m3/h
- number of fans - 4 pcs 120x120mm
- digital thermostat 19" 1U
- fan set height: 42 mm
- fan set width: 418 mm
- fan set depth: 950 mm
- thermostat height: 1U, 44.5mm
- thermostat width: 19", 482mm
- thermostat depth: 110mm
- cabinet depth: 1200mm
- black colour
- Weight: 7.2kg
- 4 screws are required to mount
- Standards: Compliant with ANSI/EIA RS-310-D, DIN41491 PART1, IEC297-2, DIN41494 PART7, GB/T3047.2-92
- Compatibility with standards: ETSI metric and international 19”
Contents of the package
- ventilation panel with power cord
- digital thermostat 19" 1U
- Fixing screws
- dimensions of the packed product: H/W/D [mm] 960/430/95
- weight with packaging: 7.5 kg
See also
Cabinet ventilation
Each 19" cabinet can be fitted with 19" standard fans Netrack or other manufacturer.
Ventilation panel with two fans and built-in thermostat
Ventilation panel with four fans and built-in thermostat
These panels are placed inside the cabinet, above or below equipment that emits a large amount of heat. They force the desired air circulation. Most often, the natural, gravitational movement of heated air from bottom to top is supported in this way. Built-in thermostats turn on ventilation only when the temperature rises. It is possible to use 2 or more fans and program them to turn on at successive temperature thresholds. This solution reduces energy consumption, noise and additionally protects the devices in the event of failure of one of the fan sets.
Both in hanging and standing cabinets, in addition to the use of universal 19" fans, it is possible to install ventilation sets in specially designed holes. In this case, the fans are usually mounted in the roofs of RACK cabinets. The use of this type of ventilation ensures a very quick exchange of air inside the RACK cabinet.
A single fan has a capacity of over 100m3 per hour. It should be remembered to ensure low temperature outside the cabinet so that it can be inside so that the exchange of air causes cooling of the devices.
120x120mm fans can be used with most wall cabinets. Depending on the model, 1 or 2 fans can be installed. Some cabinets have the option of installing fans both in the roof and in the floor. The recommended solution is:
fan:
1F 120x120mm fan with power cord
thermostat:
Standing server cabinets use roof fans adjusted to the depth of the cabinet.
For 600mm cabinet:
-2F roof fan for 600mm cabinet
- set of 2F roof fan for 600mm cabinet + 19” 1U digital thermostat
For 800mm cabinet:
-4F roof fan for 800mm cabinet
- set of 4F roof fan for 800mm cabinet + 19” 1U digital thermostat
For 1000mm cabinet:
-4F roof fan for 1000mm cabinet
- set of 4F roof fan for 1000mm cabinet + 19” 1U digital thermostat
For 1200mm cabinet:
-roof fan 4F for 1200mm cabinet
- set of 4F roof fan for 1200mm cabinet + 19” 1U digital thermostat
Fans and thermostats - execution
- bent steel plate
- sheet thickness: 1.5 [mm]
- thermally cured powder coating
Fans and thermostats - technical parameters
- capacity 460 m3/h
- number of fans - 4 pcs 120x120mm
- digital thermostat 19" 1U
- fan set height: 42 mm
- fan set width: 418 mm
- fan set depth: 950 mm
- thermostat height: 1U, 44.5mm
- thermostat width: 19", 482mm
- thermostat depth: 110mm
- cabinet depth: 1200mm
- black colour
- Weight: 7.2kg
- 4 screws are required to mount
- Standards: Compliant with ANSI/EIA RS-310-D, DIN41491 PART1, IEC297-2, DIN41494 PART7, GB/T3047.2-92
- Compatibility with standards: ETSI metric and international 19”
Contents of the package
- ventilation panel with power cord
- digital thermostat 19" 1U
- Screws for fixing
- dimensions of the packed product: H/W/D [mm] 960/430/95
- weight with packaging: 7.5 kg
See also
Comparision table Ventilation panels
| Image | Product name | Price (PLN) | color | height [mm] | width [mm] | depth [mm] |
|---|---|---|---|---|---|---|
|
2F ventilation panel for standing RACK cabinets, 600mm with digital thermostat | 259.68 | black | |||
|
4F ventilation panel for standing RACK cabinets, 1000mm with digital thermostat | 334.29 | black | |||
|
4F ventilation panel for standing RACK cabinets, 1200mm with digital thermostat | 355.97 | black | |||
|
4F ventilation panel for standing RACK cabinets, 800mm with digital thermostat | 332.59 | black | |||
|
digital thermostat 19'' 1U | 219.99 | black | 44.45 | 482.6 | |
|
fan 1F 120x120, with cable | 29.99 | black | |||
|
ventilation panel 19" 2F with cable and thermostat, black | 189.99 | black | 44.45 | 482.6 | 200 |
|
ventilation panel 19" 4F with cable and thermostat, black | 289.14 | black | 44.45 | 482.6 | |
|
ventilation panel for standing RACK cabinets, 1000mm depth | 179.99 | black | |||
|
ventilation panel for standing RACK cabinets, 1200mm deep | 219.99 | black | |||
|
ventilation panel for standing RACK cabinets, 600mm depth | 89.99 | black | 350 | ||
|
ventilation panel for standing RACK cabinets, 800mm depth | 186.39 | black |
Download PDF
Ventilation panels, fans, thermostats - proper ventilation of a 19" Rack cabinet protects devices from damage by overheating. Ventilation is necessary to ensure stable operation of devices. Fans, ventilation panels, thermostats allow you to configure the right solution for each RACK cabinet. We recommend Netrack ventilation devices.